Application of Titanium Alloy in Onshore Oil and Gas Exploration and Development

Oil and natural gas exploration and development can be divided into land exploitation and offshore exploitation. The oil and natural gas contained in the earth's crust roughly accounts for 60% of the land and 40% of the offshore oil. There is also the exploitation of offshore oil and gas in the submarine crust such as the Bohai Sea and the South China Sea. Significantly.

Before the industrialization and large-scale application of Grade 1 Titanium Plate, the shells of commonly used logging tools were made of 45 steel, 40Cr steel, and 30 MoVNb steel, but none of them could meet the needs of modern logging technology. Modern high-tech oil and gas exploration And the development requires that the metal shell of the logging tool can withstand the pressure> 98 MPa, but also resist the corrosion of underground crude oil and various media. In addition, it has a low absorption rate of natural γ-rays during logging. , It should not have a shielding effect on the earth's magnetic field. From these performance requirements, Gr5 Ti-6Al-4V Titanium Plate is a good material for the casing of logging tools.

Cutting performance of titanium alloy plate material

The high-efficiency cutting technology of titanium alloy materials is the key technology that the industry pays attention to, which fully reflects the connotation of "science and technology is the first productive force". Through the cutting practice of titanium alloy material blisk and compressor casing, it summarizes the titanium alloy cutting characteristics, cutting tool materials, tool structure, acquisition of titanium alloy high-efficiency cutting parameters, and the technology adopted to improve tool durability and processing efficiency. Countermeasures, I hope it can serve as a reference.

In order to improve the reliability and thrust of the engine, advanced and high-performance engines have adopted a large number of new materials, their structures are becoming more and more complex, and the requirements for machining accuracy are getting higher and higher, which puts forward higher requirements on the manufacturing process. In the improvement of the performance of the new generation of aero-engines, the contribution rate of manufacturing technology and materials is 50%~70%; in terms of engine weight reduction, the contribution rate of manufacturing technology and materials accounts for 70%~80%, which also fully shows that advanced High-quality Grade 7 Titanium Sheet materials and processes are the keys to reducing weight, increasing efficiency and improving the performance of aero engines.

Titanium alloy materials are more and more widely used in the aviation field due to their excellent properties such as high specific strength, low density, corrosion resistance, high-temperature resistance, and good weldability. Based on the above advantages, titanium alloy materials have become the material of choice for some parts.

Cutting characteristics of titanium alloy materials:

Some physical and mechanical properties of titanium alloys have brought greater difficulty to cutting. The small deformation coefficient during cutting of titanium alloy increases the sliding friction distance of chips on the rake face and accelerates tool wear. Titanium alloy has a small thermal conductivity, and the heat generated during cutting is not easily transmitted, and it is concentrated in a small area near the cutting edge. The modulus of elasticity of Grade 9 Ti-3Al-2.5V Titanium Plate is small, and it is easy to produce bending deformation under the action of radial force during processing, which can cause vibration, increase tool wear and affect the accuracy of parts. Due to the strong chemical affinity of titanium alloy to the tool material, the tool is prone to bond wear under the conditions of high cutting temperature and large cutting force per unit area.

What are the welding requirements for titanium plates

Titanium will react with oxygen and other gases at high temperatures to cause hardening. The ductility of the welding gap will decrease when the Grade 12 Titanium Sheet manufacturer is welding, resulting in pores, and the corrosion resistance is reduced; therefore, inert gas or vacuum protection is used when welding titanium; Recrystallization is easy to occur, especially β-titanium, which causes coarse crystals, which leads to a decrease in ductility at the place; in addition, the deformation of titanium is large when welding, and it is difficult to correct.

The general welding methods of titanium: TIG, MIG, resistance welding, plasma welding, particle beam welding, laser welding, etc. After welding, annealing treatment for stress relief or solution aging treatment or even double solution aging treatment is required to improve its Strength, toughness and fatigue resistance; for such a wide range of applications, we should have some understanding of its properties. As a metal, Grade 1 Titanium Plate has three characteristics:

  1. Does not rust

  2. Light weight, density is only 4.51

　　3. High strength (tensile strength 28—160kgf/mm)

What matters should be paid attention to during the cutting process of titanium plate

In view of these chemical properties of titanium metal, what issues should be paid attention to during the cutting process of Grade 7 Titanium Sheet?

(1) If it is a semi-automatic cutting, the guide rail should be placed on the plane of the titanium plate, and then the cutting machine should be placed on the guide rail. Note that the order cannot be reversed.

(2) The cutting parameters should be appropriate, and should be reasonably determined according to the thickness of the titanium plate, so as to obtain a good cutting effect.

(3) Check whether the cutting nozzle is unblocked. If there is a blockage, it should be cleared in time.

(4) Before cutting the titanium plate, the surface should be cleaned and a certain space should be left, which can facilitate the blowing of slag.

(5) The distance between the cutting nozzle and the surface of the Grade 1 Titanium Plate should be appropriate, too close or too far is not good.

(6) The preheating of the titanium plate should be sufficient, so as not to affect the cutting process.

(7) If you are cutting workpieces of different sizes, you should cut small pieces first, and then large pieces.

The development trend of aviation titanium alloy

With the rapid development of aviation science and technology, in the face of increasing requirements for national defense construction, a new generation of aircraft must meet the requirements of ultra-high speed, high altitude, long endurance, and ultra-long range. In order to improve the reliability of aircraft, advanced aircraft and engines have increasingly increased the amount of high-performance materials such as titanium alloys, and their structures have become more and more complex. Therefore, aerospace titanium alloys will develop towards low-cost and high-performance, and at the same time continue to carry out independent research and development of new grades and the development of new processes.

Research on Strengthening Low Cost Aviation Gr23 Ti-6Al-4V ELI Titanium Sheet

The aviation industry’s requirements for materials pay more attention to the balance of performance and cost, and no longer blindly pursue high performance. Low cost will run through the entire life cycle of products such as material selection, structural design, manufacturing technology, testing and evaluation, and maintenance, reducing the cost of titanium alloys. It is the inevitable trend of industry development. Substituting ordinary Fe elements for expensive elements such as Nb, Mo, and V, and vigorously developing near-net forming technology will become the two key directions for reducing the cost of aerospace titanium alloy engineering applications.

Research on Strengthening High Performance Aerospace Titanium Alloy

Although titanium alloys have good comprehensive properties, the existing aviation titanium alloys still cannot fully meet the high-performance requirements of the aviation industry. At present, it is difficult for high-temperature Gr9 Ti-3Al-2.5V Titanium Bar to exceed 600°C in actual long-term use. The research on aviation titanium alloys above 600°C is still in the experimental and pilot stage, and there is still a long way to go to large-scale development and application. In addition, the batch stability research and application of flame-retardant titanium alloys, high-strength, high-toughness and damage-tolerant titanium alloys have become the focus of attention of many scholars. In the future, research on high-performance aviation titanium alloys will tend to dig deeper into existing alloys and develop research on new grades of alloys at the same time.

Do you know how to carburize titanium wire?

ERTi-5 Titanium Welding Wire forms a kind of stable carbide with higher hardness with carbon. The growth of the carbonized layer between titanium and carbon is determined by the diffusion rate of titanium in the carbonized layer.

The solubility of carbon in titanium is less than 850X: the total is 0.3%, while at 600C it drops to about 0.1% B. Because the solubility of carbon in titanium is small, basically only the deposition layer through the titanium carbide layer and its lower fork domain To achieve the purpose of surface hardening. Carburizing must be carried out under the condition of removing oxygen, because the hardness of the surface layer formed by the powder that is commonly used for steel carburizing against carbon monoxide or oxygen-containing carbon monoxide reaches 2700MPa and 8500MPa, and it is easy to peel off.

In contrast, under deoxidation or decarburization conditions, a thin layer of titanium carbide may be formed when carburizing in charcoal. The hardness of this layer is 32 OUOMPa, which is consistent with the hardness of titanium carbide.

The depth of the carburized layer is roughly greater than the depth of the nitrided layer when nitriding with nitrogen under the same conditions. Under the condition of oxygen enrichment, it must be considered that the absorption of oxygen affects the depth of hardening.

Only under the condition of very thin layer thickness can the carbon powder be infiltrated in a vacuum or argon-methane atmosphere to form sufficient adhesion strength. Compared with this, the use of gas carburizing agent may form particularly hard and good adhesion. Hardened layer of titanium carbide.

Traditional processing methods of titanium and titanium alloys

The traditional methods of titanium and titanium alloy processing mainly include ingot metallurgy (or plastic processing), casting and powder metallurgy. The process method of titanium and titanium alloy ingot metallurgy is to melt sponge titanium, intermediate alloy or pure metal into ingot, and then process it into Gr5 Ti-6Al-4V Titanium Foil material by cold and hot. Ingot processing methods include forging, rolling, extrusion, drawing, stamping and spinning, among which forging is the indispensable, most basic and most important method, followed by rolling, and a small part of titanium is extruded Spinning is a supplementary method for drawing materials, and the use is the least. These five titanium ingot processing methods have their own characteristics and are complementary. In the processing of ASTM B861 25*1.2mm Titanium Tube For Chemical and titanium alloy materials, if one method is not enough, it can be processed into finished or semi-finished titanium alloys of various shapes and specifications through several methods. The plastic processing of titanium alloy has the characteristics of large deformation resistance, low plasticity, high yield strength and tensile strength ratio, large springback, sensitivity to notches, easy adhesion to the mold during deformation, and easy oxidation when heated at high temperatures. The plastic processing ratio of titanium alloy Steel, copper and aluminum are difficult.

Several current surface treatment methods for titanium building materials in the world

According to the data, there are roughly six treatment methods for the surface of titanium materials. Now we will introduce and analyze them one by one:

1. Sandblasting method

The surface of the titanium material is sandblasted with a certain particle size shot blasting to make the surface of the titanium material rough. The surface reflectivity is reduced, and the disadvantage is that it is easy to deform the plate when processing the thin plate.

2. Pickling method

The surface is treated in the acid solution of HF + HNO3 to make the surface of the plate present the original color of Grade 16 Ti-0.5Pd Titanium Tube. The disadvantage is that the color is single, and the surface color consistency is easily damaged during use, which is relatively unsuitable for the decoration industry.

3. Rolling embossing method

After the surface of the roll is pretreated, the titanium plate is smoothed, so that the surface of the titanium plate produces regular unevenness. The key to this method is the surface treatment of the rolls. The existing domestic treatment methods are sandblasting, electric spark treatment, and laser treatment.

4. Anodizing method

The color tone control of this method uses an anodizing device to give a rated voltage, and as the voltage rises, the color changes. This method can be divided into direct current electrolytic anodizing method, alternating current electrolytic anodizing method, laser irradiation multicolor treatment in solution, thick film anodizing method and chemical oxidation method.

When the DC electrolysis setting voltage is a certain multiple of the AC electrolysis setting voltage, the same color can be obtained. According to the increase in voltage, the color changes as follows: gold, red purple, cyan, yellow, purple, cyan, cyan, green, yellow-green.

To carry out the colorful coloring treatment of the titanium material, the covering method and the anodizing treatment can be combined, but the process is complicated. The method of laser irradiation in the solution can be used to carry out the colorful treatment of Gr7 Ti-0.2Pd Titanium Plate. The method is to irradiate the titanium surface with laser in the solution. As the anodic oxidation and laser irradiation are carried out at the same time, the part irradiated by the laser is etched and the oxide film becomes thinner. During the secondary anodization of the laser-irradiated part, the resistance of the etched part is reduced and the current is large. The thickness of the oxide film formed during the formation of the oxide film is different from that of the part that is not irradiated by the laser, and the color is different. Repeat this many times to obtain Multi-colored titanium surface.

5. Rolling embossing method + pickling

It adopts the advantages of rolling method and pickling method, so that the titanium surface with regular unevenness reveals the metal color that titanium metal should have, and it can give people a noble and solemn feeling in application.

6. Sandblasting + coloring method

This method reduces the reflectivity of the surface of the board, and at the same time obtains the required surface color, which is also popular in the decoration industry.

What are the advantages of induction melting technology for titanium alloy forgings?

At present, the smelting method widely used in China's industry is the vacuum consumable electrode arc smelting method. Although it can effectively ensure that the alloy liquid has a certain degree of superheat and a more accurate alloy melt composition, this method has extremely high requirements for the quality of the raw electrode, and the surface area of ​​the molten pool is large and the depth is small, resulting in high vapor pressure elements (such as A1 The volatilization loss of the element) is very large, which is unfavorable for controlling the alloy composition.

The water-cooled copper crucible induction smelting method is to place a copper crucible that is split and cooled by water under an induction electromagnetic field for smelting, which can maximize the advantages of the induction smelting method. Between the water-cooled copper crucible and the metal melt, there is a solid shell layer produced by the solidification of the titanium flange melt, the so-called condensed shell. At this time, the crucible lining is equivalent to being made of molten metal, that is, the inner surface of the crucible has the same composition as the molten metal, which prevents the crucible from contaminating the molten metal. With the increase in the number of cold crucible combinations and the input power of the power supply, the strong magnetic field promotes the rapid melting of the charge and produces a strong stirring effect, so that the temperature and composition of the metal melt are uniform, and a consistent degree of superheat can be obtained. Due to the complex composition of the new titanium bar and TiAl compound alloy, the allowable deviation of the alloy element content is small, it is difficult to meet the requirements of the alloy composition by the common arc melting method of titanium alloy rod. Water-cooled crucible induction condensed shell melting is particularly suitable for this work. The molten alloy composition is uniform, and the superheat of the alloy liquid with the interstitial element content is appropriate, which meets the requirements of static and centrifugal casting.

Machining Process and Special Tool Design of Titanium Alloy Inner Cavity Cylindrical Surface

At present, the requirements of aerospace products for processing accuracy are continuously increasing, and the number of overall structural parts in the aerospace field is continuously increasing. High-precision thin-walled cavity parts are more and more widely used in the aerospace product industry. The machining accuracy control of the Grade 2 Titanium Tube electrode, especially the machining accuracy control of the servo system, is directly related to the requirements of many performance indicators of the weapon system. Titanium alloy blanks are generally used for such parts, and the material removal rate can reach 85%. At the same time, a significant production feature of this kind of parts is the variety, small batches, and even single-piece production. This structural feature and production method have determined that its manufacturing technology has always been in an unstable state, and processing and manufacturing have always been faced with difficulties such as long processing cycles, high processing costs, and difficult control of processing accuracy.

The material of the spherical ring frame is titanium alloy tc4, which is a single piece and small batch production. These parts are precision machined parts. The external dimension of the part is sφ108mm, and the wall thickness is 4mm. It is a thin-walled and difficult-to-machine material part, and has high requirements for shape and dimensional accuracy. Due to the integral cutting and forming, it is easy to deform during the processing, the material cutting performance is poor, and the part structure is also poor, which brings great difficulties to the processing. Therefore, choosing a reasonable processing method and the correct tool is the key to ensuring processing quality.

The spherical ring frame material is titanium alloy tc4, which is characterized by: poor thermal conductivity of titanium alloy is a metal material with poor thermal conductivity. During cutting, the contact area between chips and the rake face is small, which is particularly easy to cause thermal deformation of thin-walled parts. Tungsten Sputtering Target alloy has low elastic modulus and large elastic deformation. The modulus of elasticity of titanium alloy is 1078mpa (about 1/2 of steel). When cutting, the workpiece near the flank face has a large springback, resulting in a large contact area between the machined face and the flank face. As a result, the geometric dimensions and accuracy of the workpiece are poor, the surface roughness increases, and tool wear increases. Titanium alloy has a higher affinity and higher cutting temperature. During cutting, the titanium chips and the surface to be cut are occluded with the tool material, resulting in serious tool jamming, which is easy to cause tool jamming and wear. Titanium alloy has strong high temperature chemical activity. When the temperature exceeds 600, there is an interstitial solid solution containing oxygen and nitrogen. After the gas is absorbed, the surface hardness of the titanium alloy is obviously improved, which has a strong wear effect on the knife. Therefore, titanium alloy processing tools are required to have high strength, high toughness and high red hardness.

Development Trend of TC4 Titanium Alloy Heat Treatment Process

In view of the above-mentioned status quo of TC4 titanium alloy in today's heat treatment process, in its future development trend, the following points are summarized:

First, the two-state structure and Widmanstatten structure in TC4 titanium alloy have both advantages and disadvantages. Therefore, in future research, the defects of the two should be compensated for, so that the mechanical properties of TC4 titanium alloy can be obtained. Effective enhancement.

Second, because air cooling can improve the comprehensiveness of the mechanical properties, in the solution treatment process, when the cooling rate is studied, the air cooling should be studied emphatically. After the TC4 titanium alloy is air-cooled , Its own strength and hardness are effectively improved, so as to effectively enhance the mechanical properties of TC4 titanium alloy.

Third, the size of the α of the secondary phase depends on the effective temperature. Therefore, relevant scientific researchers should be aware of how to control the size of the α of the secondary phase in the actual effect process. Control the comprehensive mechanical properties of the TC4 titanium alloy to achieve the purpose of effectively enhancing the mechanical properties of the TC4 titanium alloy.

Fourth, because the aging time and aging temperature of TC4 titanium alloy have similar changes in mechanical properties, relevant scientific researchers should conduct in-depth research on the aging time of titanium welded tubing.

Fifth, since the equipment of cryogenic treatment process is relatively expensive, the specific mechanism is not yet understood, and it has not been widely used at this stage. Therefore, the future research on cryogenic treatment equipment mainly focuses on how to get the cost. Effective reduction, only when the cost of the layer is reduced, can it be applied to various fields, which will help promote the development of Pickling Titanium Wire in the cryogenic treatment process.

What are the polishing methods for titanium rods and titanium alloys?

What are the polishing methods for titanium rods and titanium alloys? (1) Fine grinding. That is, the surface of titanium rods and titanium-containing alloy castings is lapped using conventional various types of emery rubber wheels. The problem that needs to be paid attention to during grinding is still not to cause the casting to generate heat, not to cause grinding damage on the surface of the casting, and to make the entire surface smooth.

(2) Barrel grinding method. The so-called barrel grinding method is to put the processed castings, abrasives, water and additives into the barrel-type grinding tank. The grinding barrel generates rotation and vibration, causing friction between the mixture of abrasives and the processed castings, and grinds the surface of the castings smoothly. ,smooth.

It is characterized by no dust pollution, low labor intensity, and no heat generation in the conventional grinding process. At present, Japan has commercialized barrel grinders and abrasive materials used for grinding Gr23 Ti-6Al-4V ELI Titanium Sheet and titanium-containing alloy castings, other metal castings and plastics.

(3) Mechanical polishing method. Use different specifications of soft cloth wheels or black brushes, dipped in titanium and titanium-containing alloy special polishing paste to polish the surface of titanium and Grade 36 Titanium Wire. When polishing titanium castings, it is necessary to completely clear the contamination layer on the surface of the casting and no new grinding and hardening layer occurs, which will not achieve the desired polishing effect.

High-speed and light-pressure methods are still used for polishing. The author has also tried using green polishing paste to polish titanium and titanium-containing alloy castings, and achieved a relatively ideal polishing effect. The polished titanium and titanium-containing alloy castings cannot be washed immediately. The surface oxide film must be completely formed before washing, otherwise the surface will darken.

Titanium alloy industry chain

The industrial chain of the titanium industry can be simply divided into two, one is the industrial chain of non-ferrous metals: titanium ore→sponge titanium→titanium ingot→titanium material; the other is the industrial chain of chemical industry: titanium ore→titanium dioxide. These two industrial chains are closely related to each other in the upstream, but are independent of each other in the midstream and downstream.

The titanium non-ferrous metal industry chain can be divided into three major parts from top to bottom:

1) The upstream includes titanium ore resources such as ilmenite and rutile, as well as artificial rutile, titanium slag and Grade 1 Titanium Tube tetrachloride processed from ilmenite;

2) The middle stream is mainly divided into two parts: one is the reduction of titanium tetrachloride to generate sponge titanium; the other is the melting and casting of sponge titanium into titanium ingots, and then the preparation of titanium round rod processing materials including forgings, bars, plates, pipes, wires, wires, etc. ；

3) The downstream is mainly to further process titanium blanks according to the requirements of specific applications such as aerospace, petrochemical, nuclear power, ships, desalination, automobiles, sports medicine and other fields;

Titanium alloy grinding and polishing technology

(1) Fine grinding

That is, the surface of titanium and titanium alloy castings is polished by using conventional various types of emery rubber wheels. The problem that needs to be paid attention to during grinding is still not to cause the casting to generate heat, not to cause grinding damage on the surface of the casting, and to make the entire surface smooth.

(2) Barrel grinding method

The so-called barrel grinding method is to put the processed castings, abrasives, water and additives into the barrel-type grinding tank. The grinding barrel rotates and vibrates, causing friction between the mixture of abrasives and the processed castings to grind the surface of the castings. Smooth and flat. It is characterized by no dust pollution, low labor intensity, and no heat generation in the conventional grinding process. At present, Japan has commercialized barrel grinders and abrasive materials used for grinding Titanium Planar Target alloy castings, other metal castings and plastics. Tests have confirmed that the pk series abrasives have the highest grinding efficiency, but the surface roughness is also the highest. Although the grinding efficiency of SA and B series abrasives is not as good as PK, the surface smoothness of the titanium castings after grinding is the highest. At present, the Fourth Military Medical University has successfully developed the first dental barrel grinder in China.

(3) Mechanical polishing method

Use different specifications of soft cloth or black brush, dipped in ASTM F67 Gr2 Titanium Sheet and titanium-containing alloy special polishing paste to polish the surface of titanium and titanium-containing alloy. When polishing titanium castings, it is necessary to completely clear the contamination layer on the surface of the casting and no new grinding and hardening layer has occurred, which will not achieve the desired polishing effect. High speed and light pressure should be used when polishing. The author has also tried to use green polishing paste to polish titanium and titanium-containing alloy castings, and achieved a relatively ideal polishing effect. The polished Grade 23 Titanium Plate and titanium-containing titanium alloy castings cannot be washed immediately. The surface oxide film must be completely formed before washing, otherwise the surface will become dark.

What are the applications of titanium tubes?

Titanium tubes are commonly used in various applications because most stainless steels and other materials in different situations are inefficient. Titanium tubes are one of the most common titanium rolling mill products, and are used in countless products due to their corrosion resistance and strength-to-weight ratio. Titanium and its alloys are constantly evolving to effectively meet the challenges of various industries, from which new characteristics of titanium are required to achieve productivity and to be able to meet federal regulations. Some common uses of titanium tubes are as follows:

Aerospace

Titanium is used for airframe and aerospace engine parts. Titanium pipes can handle high temperatures even without creep. Because the tube has excellent resistance to fatigue and crack growth, it is recognized for its high strength-to-density ratio.

Applications in the power industry

Power generation-Titanium Coil Tube play an important role in high temperature water and steam environments. Grade 2 titanium has been used in different power plants to deal with problems related to boiler friction and condenser failure.

Application in the chemical industry

Chemical processing-highly corrosive environments, such as those commonly found in demand piping systems, chemical processing industries, heat exchangers, and other systems capable of handling heavy loads. With titanium's excellent corrosion resistance, it is likely to effectively withstand high stresses in extreme environments for a long time.

Oil and gas industry

Oil and gas-high temperature, high pressure or high pressure, high temperature applications, such as oil and gas well applications, require pipelines that can be used continuously. The oil and gas industry generally requires high corrosion resistance of titanium, especially in areas such as the upper part, the seabed and downhole.

Titanium tubes are considered to be one of the 9 most abundant elements in the earth's crust, and the 7 most abundant metals. Alloyed titanium tubes and a mixture of vanadium and aluminum can increase the strength of Grade 7 Titanium Plate  while maintaining its weight better than that of steel.

6al4v titanium plate can work easily. With its rigidity, strength, toughness, very ideal high-performance metal pipe metal and high melting point, it is likely to encourage the industry to use titanium pipes and titanium alloy pipes. It can be used in aircraft hydraulic systems, medical implants, hydraulic systems, subsea equipment, offshore drilling platform components, and chemical and marine processing plants.

Titanium and titanium alloy seamless pipes are widely used in these industries

Titanium and titanium alloy seamless tubes have the characteristics of low relative density, high specific strength, large yield ratio, good plastic deformation and ductility, low heat transfer coefficient, and high tensile strength of titanium. Titanium is so stable that it is difficult to develop designs, smelters and even apply it, so it is not common for everyone to think that way. In fact, the reserves of titanium account for 0.6% of the area, ranking ninth, and the reserves are very large. The low activity of titanium lies in the condition. Titanium is very stable in the indoor temperature and air, and it is not easy to reflect. As everyone knows, it has strong organic chemical activity at high temperature, and it is very easy to react with a variety of vapors. Titanium is a metal material, its heat transfer coefficient is very fast, but much slower than some general metal materials. According to the current data, the heat transfer coefficient of titanium is close to that of stainless steel, about one-fourth that of aluminum and one-fifth of that of iron. It has great potential for development in the automotive industry.

The application of titanium and AMS 4900 CP Titanium Plate alloy seamless pipes in the shipbuilding industry is mainly to use its high-quality corrosion resistance, low density, memory capacity, non-magnetic and other characteristics. Titanium and titanium alloys are widely used in strategic nuclear submarines, free submersibles, nuclear icebreakers, hydrofoils, hovercraft, demining vessels, propellers, whip antennas, sea pipelines, coolers, heat exchangers, acoustic material equipment, security equipment, etc. , The scope of application of titanium alloys includes: industrial production of pure titanium, titanium-zirconium alloy, titanium alloy, and titanium alloy.

(1) All titanium boats. F1 has very good social experience in the production of titanium boats. In the 1990s, all-titanium wooden boats or motorboats were manufactured by  New Shipyard and Jiangteng Shipyard. All-titanium ships have the advantages of lighter weight, faster speed, small diesel engines, low fuel costs, less carbon dioxide emissions, no surface coating, and easy cleaning of accessories. The disadvantages are the increase in raw material costs and the large difficulty of production and processing. , Strict safety protection regulations. Experimental results show that the ship’s speed reliability, vibration and noise are all very good.

(2) The molecular driving force ship. Titanium alloys are used to replace stainless steel plates in the production of steam generators, heat exchangers and ship cooling towers, which are free from erosion damage. titanium bicycle tubing steam engines are widely used in power stations of Russian nuclear icebreakers. The selection of titanium alloy can increase the service life of diesel engines by more than 10 times.

(3) Propeller. The raw materials of the propeller are specified to have high compressive strength, excellent fatigue characteristics, abrasion resistance and cavitation corrosion resistance in the sea surface material. Titanium alloys can be specified in consideration of the comprehensive type. For the first time, the U.S. Navy used a 1500mm diameter, four-leaf demountable titanium alloy propeller on a hydrofoil. The hydrofoil motorboat propeller was developed in China in 1972. At this stage, various specifications and models of titanium alloy propellers have been produced, with a diameter of 450-1700mm. It can produce titanium alloy fixed propellers with a diameter of 1200mm and a quality of 135kg. Long-term application instructions, the life of titanium alloy propellers is more than 5 times that of alloy copper propellers.

(4) Marine pumps, gate valves and pipelines. Pumps, gate valves and pipes made of copper and stainless steel plates have a service life of only 2-5 years because of extreme working standards. The dismantled titanium alloy has good actual effect and is suitable for moving sea surface pipelines with large flow. The Russian ship pipeline service life standard has three service life regulations, that is, the initial connection guarantee period is 8-9 years; the service life is not less than 15 years; the full service life of various vessels should be reliably operated within 25-30 years .

The main application fields of titanium alloy forgings

How to distinguish between 303 stainless steel rod and titanium rod:

In fact, to distinguish between stainless steel and titanium welding wire, there are some other simple ways to distinguish:

1. Seen from the color. Titanium looks very dark, steel looks very white.

2. Immerse it in nitric acid and you will find that titanium will not react. Once the stainless steel is put down, the stainless steel will react strongly.

3. Titanium has a density of 4.51 and is lighter in weight, while stainless steel is heavier. After careful measurement, it is easy to distinguish it. This should be the biggest difference.

4. titanium exhaust flange can draw gray and black marks on the tiles, but stainless steel can't make marks.

Application fields of titanium rod filter element: chemical industry, pharmaceutical industry

TC4 titanium alloy has excellent comprehensive properties, and the output accounts for more than 50% of the entire titanium alloy products, and more than 80% of the total amount of titanium alloy products is used in the aerospace industry. It is mainly used as load-bearing components of aircraft, which accounts for approximately the amount of titanium alloy used for load-bearing components. 70% to 80% of the total. At present, some countries in the world have mature technologies for preparing large-scale titanium alloy materials and have formulated corresponding specifications. For example, the thickness of Ti-6Al-4V (TC4) titanium alloy sheets in the American Standard AMS 4911L can reach 100mm. However, due to the limitations of the preparation process and the level of use, the preparation of high-performance large-size TC4 titanium alloy thick plates (thickness greater than 40mm and width greater than 2000mm) in China still faces many challenges.

As the thickness and width of the TC4 titanium alloy sheet increase, the difficulty of controlling the uniformity of the structure and maintaining its strong plastic matching will also increase. The use of suitable hot working methods is effective for preparing large-size TC4 titanium alloy thick plates. way. The researchers used the thermal processing map obtained by the thermal simulation test as a reference to explore the deformation amount, rolling temperature and other process parameters, and successfully prepared a large-size TC4 with good plate shape and uniform structure on a 2800mm four-high hot rolling mill. titanium rectangular rod alloy thick plate.

The TC4 titanium alloy ingot used in the experiment was smelted by vacuum consumable arc three times, with a mass of 5t. After peeling the ingots, samples were taken at the upper, middle, and lower parts of the ingot and analyzed for composition. From the analysis results, it can be seen that the main elements Al, V and the impurity elements Fe and O are evenly distributed on the upper, middle, and lower parts of the ingot without segregation. Fully meet the requirements of preparing large-size TC4 titanium alloy thick plates.

The riser and the bottom of the ingot are removed after ultrasonic testing, and then forged into a slab by multi-directional forging on a large-tonnage fast forging machine. A sample was taken from the cross section of the slab head to observe the microstructure in the middle of the thickness direction. Simultaneously cut a Φ10mm compression sample on the cross section of the slab head, and conduct a thermal simulation test on the Gleeble1500 thermal simulation test machine. Among them, the deformation temperature is set to 800, 850, 900, 950, 1000, 1050°C, and the strain rate is set to 0.01, 0.1, 1, 10, and 20s-1.

Next, the slab is heated, reversing hot rolling, ordinary annealing, and surface treatment to obtain a 40-70mm thick TC4 Titanium Capillary Pipe alloy sheet. Use the MTS testing machine to test the room temperature tensile properties of the plate; use the Olympus microscope to observe the metallographic structure.

the result shows:

(1) The hot rolling process developed by the thermal simulation test results successfully produced large-size TC4 titanium alloy thick plates with excellent comprehensive properties. The key process parameters of TC4 thick plate rolling and its suitable control range are heating temperature 900～980℃, strain rate 5～12s-1, and the maximum deformation rate of the last fire pass is not less than 15%～20%.

(2) The microstructure of the prepared TC4 titanium alloy thick plate is a two-state structure, composed of equiaxed primary α phase, elongated secondary α phase and intercrystalline β phase with an average grain size of 25μm. The tensile strength is 925～960MPa, the yield strength is 870～910MPa, and the elongation is 12.0%～14.5%.

Burr treatment method for titanium rods, titanium plates, and titanium processed parts

Titanium alloy drill pipes have excellent physical and mechanical properties, which are mainly manifested in the characteristics of high strength, low density, good inherent winding properties, and so on. Because titanium alloy drill pipes have high vibration resistance, they do not need a while drilling jar. Titanium alloy drill pipe has strong anti-corrosion resistance and adaptability to the downhole environment and can work in high-temperature hydrogen sulfide acidic and high-corrosive environments.

Gr23 Ti-6Al-4V ELI Titanium Pipe  alloy drill collars and titanium alloy drill pipes have the following characteristics:

1. Non-magnetic, titanium, and titanium square bar alloy have non-magnetic characteristics. Under the condition of 20 Oersted, its magnetic permeability is 1.00005~1.0001H/m, and it will not be magnetized even in a very strong magnetic field;

2. Lighter specific gravity, titanium, and alloy are 43% lighter than steel;

3. The modulus of elasticity is small. The modulus of elasticity of titanium alloy is 57% of that of steel.

Application of titanium rods and titanium alloy materials in the human body

Titanium is a metal with relatively active chemical properties. It can interact with non-metals such as O2, N2, H2, S and halogen when heated. However, at normal temperature, a very thin and dense oxide protective film is easy to form on the surface of titanium, which can resist the action of strong acid and even aqua regia, showing strong corrosion resistance. Therefore, general metals become riddled in acid, alkali, and salt solutions, but titanium is safe. Liquid titanium can dissolve almost all metals, so it can form alloys with a variety of metals. Titanium steel made by adding titanium to steel is tough and elastic. Titanium and metal Al, Sb, Be, Cr, Fe, etc. form interstitial compounds or intermetallic compounds.

     Aircraft made of titanium alloy can carry more than 100 passengers more than aircraft made of other metals with the same weight. The finished submarine can resist both seawater corrosion and deep pressure, and its diving depth is 80% higher than that of a stainless steel submarine. At the same time, titanium is non-magnetic and will not be found by mines, and has a good anti-monitoring effect.

     Titanium is "biophilic". In the human body, it can resist the corrosion of secretions and is non-toxic, and it is suitable for any sterilization method. Therefore, it is widely used in the manufacture of medical equipment, artificial hip joints, knee joints, shoulder joints, flank joints, cranium, active heart valves, and bone fixation clips. When new muscle fiber rings wrap around these "titanium bones", these titanium bones begin to maintain the normal activities of the human body. Titanium is widely distributed in the human body, and the content in a normal human body is no more than 15 mg per 70 kg of body weight. Its role is not clear. However, titanium can stimulate phagocytes and enhance immunity. This effect has been confirmed.

     Titanium compounds and uses: Important titanium compounds are: titanium dioxide (TiO2), titanium tetrachloride (TiCl4), and barium metatitanate (BaTiO3). Pure titanium dioxide is a white powder, an excellent white pigment, and the trade name is "titanium dioxide". It has both the covering properties of lead white (PbCO3) and the lasting properties of zinc white (ZnO). Therefore, people often add titanium dioxide to paint to make high-grade white paint; in the paper industry as a filler added to the paper pulp; in the textile industry as a matting agent for man-made fibers; in the glass, ceramics, and enamel industries Additives to improve its performance; used as a catalyst in many chemical reactions. With the increasing development of the chemical industry today, titanium dioxide and titanium compounds, as fine chemical products, have high added value and have very attractive prospects. Titanium tetrachloride is a colorless liquid; it has a melting point of 250K, a boiling point of 409K, and an irritating odor. It is easily hydrolyzed in water or humid air and emits a lot of white smoke. TiCl4+3H2O == H2TiO3+4HCl Therefore TiCl4 is used as an artificial aerosol in the military, but it is used in maritime warfare. In agriculture, people use the dense fog on the ground formed by TiCl4 to reduce the heat loss from the ground at night and protect vegetables and crops from severe cold and frost. The TiO2 and BaCO3 are melted together to prepare barium metatitanate: TiO2＋BaCO3 == BaTiO3 + CO2- The artificially prepared BaTiO3 has a high dielectric constant, and the capacitor made from it has a larger capacity, and more importantly, BaTiO3 has Significant "piezoelectric properties", the crystal will generate current when pressed, and will change its shape when it is energized. People put it in the ultrasonic wave, and it generates electric current when it is pressed. The strength of the ultrasonic wave can be measured by measuring the strength of the electric current. It is used in almost all ultrasonic instruments. With the development and utilization of titanate, it is more and more widely used to manufacture non-linear components, dielectric amplifiers, computer memory components, miniature capacitors, electroplating materials, aviation materials, strong magnetism, semiconductor materials, optical instruments, reagents, etc. . The excellent properties of titanium, titanium alloys and titanium compounds prompt humans to urgently need them. However, the high production cost limits the application. We believe that in the near future, with the continuous improvement and improvement of titanium smelting technology, the application of titanium, titanium alloys and titanium compounds will be further developed.

Gr3 Pure Titanium Sheet      Gr2 Polished Titanium Wire      ASTM B861 25*1.2mm Titanium Tube For Chemical