What matters should be paid attention to during the cutting process of titanium plate

In view of these chemical properties of titanium metal, what issues should be paid attention to during the cutting process of Grade 7 Titanium Sheet?

(1) If it is a semi-automatic cutting, the guide rail should be placed on the plane of the titanium plate, and then the cutting machine should be placed on the guide rail. Note that the order cannot be reversed.

(2) The cutting parameters should be appropriate, and should be reasonably determined according to the thickness of the titanium plate, so as to obtain a good cutting effect.

(3) Check whether the cutting nozzle is unblocked. If there is a blockage, it should be cleared in time.

(4) Before cutting the titanium plate, the surface should be cleaned and a certain space should be left, which can facilitate the blowing of slag.

(5) The distance between the cutting nozzle and the surface of the Grade 1 Titanium Plate should be appropriate, too close or too far is not good.

(6) The preheating of the titanium plate should be sufficient, so as not to affect the cutting process.

(7) If you are cutting workpieces of different sizes, you should cut small pieces first, and then large pieces.