Titanium will react with oxygen and other gases at high temperatures to cause hardening. The ductility of the welding gap will decrease when the Grade 12 Titanium Sheet manufacturer is welding, resulting in pores, and the corrosion resistance is reduced; therefore, inert gas or vacuum protection is used when welding titanium; Recrystallization is easy to occur, especially β-titanium, which causes coarse crystals, which leads to a decrease in ductility at the place; in addition, the deformation of titanium is large when welding, and it is difficult to correct.
The general welding methods of titanium: TIG, MIG, resistance welding, plasma welding, particle beam welding, laser welding, etc. After welding, annealing treatment for stress relief or solution aging treatment or even double solution aging treatment is required to improve its Strength, toughness and fatigue resistance; for such a wide range of applications, we should have some understanding of its properties. As a metal, Grade 1 Titanium Plate has three characteristics:
1. Does not rust
2. Light weight, density is only 4.51
3. High strength (tensile strength 28—160kgf/mm)
No comments:
Post a Comment