What are the technical requirements for titanium rods?

Titanium rod has good physical and chemical properties, low density, light weight, non-magnetic, high strength, good corrosion resistance, it has good mechanical properties and welding performance, Baoji titanium rod is widely used in chemical equipment, seawater In desalination, ship parts, electroplating industry, etc., the corrosion resistance of titanium is 10 times that of ordinary stainless steel, and titanium metal is a metal with low human rejection, so the processed parts of medical titanium rods are widely used in human implantation and medical equipment. use. medical titanium bar

skills requirement:

1. The chemical composition of titanium and titanium alloy bars shall comply with the provisions of GB/T 3620.1. When the purchaser re-inspects, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.

2. The diameter or side length of the hot-worked bar and its allowable deviation shall comply with the provisions of Table 1.

3. After hot processing, the bar is turned (ground) and cold-rolled. The allowable deviation of the diameter of the cold-drawn bar should meet the requirements of Table 2.

4. The out-of-roundness of the bar that has been turned (ground) after hot processing should not be greater than half of its dimensional tolerance.

5. The indefinite length of the processed bar is 300-6000mm, and the indefinite length of the annealed bar is 300-2000mm, and the fixed or double length should be within the range of the indefinite length.