How to deal with burrs in titanium plate processing

The method of this mechanical treatment is: bury the Grade 1 Pure Titanium Plate in a lot of abrasives, add some grinding and polishing compounds dissolved in water, use the principle of oscillation to mix the abrasives with the material, and continuously ask the workpiece to scour, the surface and edges of the workpiece. Corners, etc. are ground by abrasives and then polished. This technology can be used for deburring, chamfering, rust removal, descaling, flattening and finishing processing for metal parts of various sizes and shapes.

Abrasives can be alumina (including fused, sintered or natural), corundum, plastic, quartz, ceramics, etc., and can be a single species or a mixture of several. The shapes of these abrasives can be made into diagons, cylinders, diamonds, etc. The reason why preformed abrasives are made first is that it is more economical and abrasive than any shape and natural shape materials. According to the shape and size of the workpiece, use abrasives of different shapes and sizes. Rolling abrasives include pumice, quartz, granite leather corners, shells, iron filings and ceramic fragments. The size of the abrasive particles should be larger or smaller than each hole in the part. The amount of content in the drum is also an important factor affecting the quality of the agricultural surface of the parts. The number of people in the drum is usually 70% of the drum volume. The solution in the drum should be added to about 95% of the drum volume (note: when adding acidic solution to the drum, you should add enough water first, and then add acid to avoid corrosion of parts during the rolling process, because the time increases , the concentration of the contained solution gradually decreases, and even loses its effect.

The processing time of Grade 7 Titanium Sheet can range from several minutes to several hours. The key is to choose the abrasive, which is determined by experiment. Only in this way can a uniform, bright appearance be achieved. After processing, the workpiece is unloaded together with the abrasive, which is screened by the separator and taken out, and the recovered abrasive can be continuously returned to the machine for processing. Oscillating finishing machine is divided into two categories: single machine and online, which are selected according to production needs.