1) For the site or warehouse where Grade 12 Ti-0.3Mo-0.8Ni Titanium Sheet products are stored, it should be selected in a clean and tidy place with smooth drainage, away from factories and mines with harmful gases or dust. Weeds and all debris should be removed from the ground to maintain the cleanliness of titanium materials.
2) Do not stack with acid, alkali, salt, Shimin soil and other materials that are corrosive to titanium materials in the warehouse. Different varieties of titanium materials should be sorted and stacked to avoid confusion and contact with corrosive objects.
3) Titanium alloy materials such as large titanium tubes, titanium rods, thick titanium plates, large diameter titanium tubes, and titanium forgings can be stacked in the open air.
4) Small and medium-sized titanium, titanium plates, titanium rods, medium-diameter titanium tubes, titanium wires, etc. can be stored and placed in a shed with satisfactory ventilation.
5) Small-scale titanium materials, thin titanium plates, titanium strips, small-diameter or special-shaped titanium tubes, various cold-rolled and cold-drawn titanium materials, and high-priced and easily corroded metal products can be stored and stored.
6) The warehouse is required to maintain a suitable storage background, pay attention to ventilation in sunny days, and close it to prevent moisture in rainy days.
7) The warehouse should be selected according to the geographical conditions, and the ordinary closed warehouse should be used if it is considered appropriate, that is, the warehouse with the roof and the wall, the door is tightly closed, and the ventilation device is installed.
No comments:
Post a Comment