The tensile strength of titanium plate is one of its important mechanical performance parameters

The tensile strength of titanium plate is one of its important mechanical performance parameters. Tensile strength indicates the maximum external force that the material can withstand during the stretching process of the material. The tensile strength of titanium plate is generally above 800 MPa.

The tensile strength mainly depends on the purity, grain size and heat treatment state of the titanium plate. Titanium is a metal with excellent mechanical properties and corrosion resistance, and its tensile strength has higher strength and rigidity than steel. In the production process of titanium plate, its tensile strength can be further increased by controlling process parameters such as smelting, rolling and heat treatment. Grade 9 Ti-3Al-2.5V Titanium Plate / Grade 9 Titanium Plate / Ultra-Thin Titanium Alloy Sheet

In addition to tensile strength, titanium plate also has good corrosion resistance, weldability and processing performance. These characteristics make it widely used in aviation, chemical industry, marine engineering and other fields. For example, in aircraft manufacturing, it can be used to manufacture important components such as fuselage, wings and landing gear to increase the performance and life of the aircraft.

It should be noted that the price of titanium plate is relatively high, so its performance and cost-effectiveness need to be comprehensively considered when selecting and using it. At the same time, its production process and technical requirements are also high, requiring good technical and equipment support.

In summary, the tensile strength of titanium plate is one of its important mechanical performance parameters, with excellent performance and broad application prospects. When selecting and using titanium plate, it is necessary to comprehensively consider its performance, cost and process requirements to ensure safe and efficient use.

Let's talk about the rolling and cutting process of titanium plates

1. If semi-automatic cutting is performed, the guide rail should be placed on the plane of the titanium plate, and then the cutting machine should be placed on the guide rail. Note that the order cannot be reversed.

2. The cutting parameters should be appropriate and should be reasonably clarified according to the thickness of the titanium plate, so as to obtain good cutting results.

3. Check whether the cutting nozzle gas is unobstructed. If there is a blockage, it should be dredged in time. Gr7 Ti-0.2Pd Titanium Plate / Gr5 Ti-6Al-4V Titanium Sheet / Grade 3 Pure Titanium Plate

4. Before cutting the titanium plate, the surface should be cleaned and a specific space should be left, which can facilitate the blowing of slag.

5. The distance between the cutting nozzle and the surface of the titanium plate should be appropriate. It is not good to be too close or too far.

6. Preheating should be sufficient to avoid affecting the cutting process.

7. If cutting workpieces of different sizes, small pieces should be cut first, and then large pieces.

Analysis of what factors affect the quality of titanium tubes?

Titanium tubes are a kind of high-strength, low-density, corrosion-resistant metal material, commonly used in aviation, aerospace, shipbuilding, chemical industry and other fields. Its quality is affected by the following factors:

1. Raw material quality

The raw material is titanium ingot. The purity, impurity content, grain size and other factors of titanium ingot will directly affect its quality.

2. Production process

The production process includes heat treatment, extrusion, rolling, stretching, welding and other links. The process parameters, equipment accuracy, operator skills and other aspects of each link will affect its quality.

3. Surface quality

The smoothness, defect-free and oxide-free surface of titanium tubes will affect its service life and corrosion resistance. Gr12 Ti-0.3Mo-0.8Ni Titanium Tube / Gr2 Pure Titanium Tube / Grade 9 Ti3Al2.5V Titanium Pipe

4. Dimensional accuracy

The inner diameter, outer diameter, wall thickness and other dimensional parameters of titanium tubes have high accuracy requirements. Problems such as dimensional deviation and uneven wall thickness will affect its performance.

5. Inspection quality

Inspection quality is an important means to ensure its quality, including chemical composition analysis, mechanical property testing, non-destructive testing and other aspects. The inspection method and its accuracy will affect the quality of titanium tubes.

In short, the quality of titanium tubes is affected by many factors. To ensure its quality, it is necessary to strictly control multiple aspects from raw materials to production processes to testing.