Pipe cutting and beveling of titanium pipes!

With the continuous expansion of the application field of titanium tube, the consumption is also rising. Our titanium tubes have been used in construction, in order to make construction more scientific, we can provide users with high-performance titanium tubes.

Research on refractory materials for casting molds has always been linked to the crucible materials for smelting titanium tubes and titanium alloy tubes. Based on kinetic reasons, the crucible materials need to be in contact with the titanium liquid for a long time during smelting, and the titanium liquid and the titanium liquid are in contact with each other for a long time. The contact time of the holding material is much shorter, so the available crucible material can be used as a mold material for titanium alloy pipes.

Materials that have been studied include carbides, nitrides, borides, sulfides, oxides, rare earth oxides, fluorides, oxyfluorides, sulfur oxides, and refractory metals such as W and Mo. Only very few materials have high chemical stability to titanium liquid, including ThO2, certain rare earth oxides, TaB2, Npc, some rare earth sulfides and some rare earth oxyfluorides.

Pipe cutting and beveling processing of Grade 2 Pure Titanium Tube; pipe cutting and beveling processing should be carried out by mechanical processing methods in special workplaces. When processing, use clean water with non-polluting medium for cooling to prevent oxidation. Processing tools should be dedicated and kept clean to prevent iron contamination. The processed nozzle should ensure that the surface is smooth and free of defects such as cracks and heavy skins. The maximum inclination deviation of the cut plane shall not exceed 1% of the pipe diameter.