The plastics industry is the second largest user of titanium dioxide

When the hydrogen content in the titanium tube is too high, the brittleness of the titanium tube will reduce the impact of toughness and notched tensile strength of the titanium tube. Therefore, the hydrogen content in titanium pipe joints should not be higher than 0.015%. In order to reduce hydrogen absorption, fingerprints, abrasion marks, grease and other residues should be removed before heat treatment. There is no steam in the heat treatment furnace. When the hydrogen content of the titanium tube is higher than the allowable value, vacuum annealing cleaning is required.

When the temperature is not higher than 540°C, the oxide film will not thicken, but at a higher heat treatment temperature, the oxidation rate of the oxide film will increase, and the internal diffusion layer of the oxide film will become a pollution layer. The oxygen contamination layer has a high brittleness ratio, which causes cracks and damage on the surface of the part. Deoxidation pollution layer includes mechanical processing, pickling, chemical polishing and so on. During heat treatment, the heating time should be shortened as much as possible while protecting the heat treatment. It can also be carried out in a vacuum furnace or an inert gas furnace. The pollution caused by the heating of titanium pipe fittings in the air furnace should be avoided or appropriately reduced.

Features of titanium tube:

1 Corrosion resistance of titanium pipe joints. Titanium is a very active metal with a very low equilibrium potential and a strong tendency to thermodynamic corrosion in the medium. Titanium has good stability and corrosion resistance in oxidizing, neutral and weakly reducing media.

2 Titanium pipe joints have good heat resistance. It can be used for a long time at 600℃ or high temperature.

3Non-magnetic, non-toxic and titanium alloy pipe fittings are non-magnetic metals and will not be magnetized in a large magnetic field.

Ti 6Al-2Sn-4Zr-6Mo Titanium Rod     titanium flat bar     titanium alloy rod     titanium flat rod

Titanium alloy parts processing plays an important role in machinery manufacturing

Small-sized bars of titanium and titanium alloys are generally produced by rolling. However, during heating, rolling, and heat treatment, due to uneven distribution of temperature and plastic workability, as well as shearing, transportation and stacking, etc. Different degrees of bending is often produced. At this time, the titanium rod must pass through the straightening place to ensure that the bending degree of the rod can meet the requirements of use.

The commonly used straightening methods for titanium rod processing include pressure straightening and roller straightening, while small-sized bars generally use roller straightening, which has higher efficiency. However, for small-sized titanium and titanium alloy bars, the desired effect is often still not achieved after repeated straightening, and the problem of direct fracture during the straightening process often occurs.

The room temperature elastic modulus of commonly used titanium and titanium alloys is mostly lower than 120GPa. Therefore, titanium and titanium alloy bars will undergo greater elastic deformation under stress conditions under relatively small rolling production, and the rebound will be large. He plastic is easy to straighten, and the yield ratio of many titanium alloys is between 09-1. For reasons such as straightening, it is easy to break during straightening. Therefore, titanium and titanium alloy bars generally require hot straightening at the over-straightening point to ensure the straightening effect.

grade 5 titanium plate     titanium pipe fitting     titanium exhaust pipe     Grade 1 Titanium Pipe

Slitting method for titanium plate and titanium strip

In the application of various titanium alloy products, forgings are mostly used in gas turbine compressor discs and medical artificial bones that require high strength, toughness and high reliability. Therefore, not only high dimensional accuracy is required for forgings, but also materials with excellent characteristics and high stability are required. For this reason, it is necessary to give full play to the characteristics of titanium alloy in the manufacturing process of titanium forgings to obtain high-quality forgings. Titanium alloys are difficult to forge and are prone to cracks. Therefore, the most important thing in the production of titanium alloy forgings is to properly control the forging temperature and plastic deformation.

Application fields of titanium alloy forgings:

1. The field of aerospace

50% of the world's titanium materials are used in the aerospace field. 30% of the body of military aircraft uses titanium alloys, and the amount of titanium used in civil aircraft is gradually increasing. In the aerospace field, titanium alloy forgings are used in the fuel tanks of rocket and satellite propulsion engines, the shell of attitude control engines, the blades of liquid fuel turbopumps and the inlet section of suction pumps.

2. Turbine blades for power generation

Increasing the length of the blades of the steam turbine for thermal power generation is an effective measure to improve the power generation efficiency, but lengthening the blades will increase the load on the rotor.

Ti 6Al-2Sn-4Zr-6Mo Titanium Rod     titanium flat bar     titanium alloy rod     titanium flat rod

Pure titanium and titanium alloy are made into many daily necessities

At present, most of the domestic titanium alloy sheet production still adopts single-piece rolling. Due to the poor low-temperature plasticity of titanium alloys and large cold deformation work hardening, it is extremely difficult to produce thin plates by the monolithic method. In order to make the rolling process go smoothly and reduce the temperature drop of the metal during the forging process, especially to reduce the surface chilling of the blank, the die for forging the titanium alloy needs to be preheated. Otherwise, the temperature drop and surface chilling of the metal will make the metal not fill the mold groove well and may cause many cracks. The die preheating system for titanium alloy forging is usually detachable, but sometimes a heating device installed on a press is also used. The detachable mold heating system is usually a gas heater, which can slowly heat the mold to the required temperature range before the module is assembled into the forging equipment. The heating device fixed on the press usually adopts induction heating or resistance heating. With the expansion of the market, the new technology of superplastic forming and diffusion bonding of titanium alloy sheet has been widely used.

grade 5 titanium plate     titanium pipe fitting     titanium exhaust pipe     Grade 1 Titanium Pipe

Titanium alloy is more suitable for spacecraft manufacturing than steel

In the 1980s, the research and application of titanium alloy pipes in the petroleum industry began in foreign countries. Chinese companies have also made certain progress in the development of titanium alloy tubing and casing. The current products have been initially tested in wells. It is believed that in the near future, titanium alloy pipes will have more applications in the petroleum equipment industry, and new breakthroughs will be made in the world industry as soon as possible.

1), lower density

Can significantly reduce the string load, especially ultra-deep oil well pipe.

2), higher strength

Including tensile strength, creep strength, fatigue strength, etc. The specific strength of different materials at different temperatures.

3), excellent corrosion resistance

Excellent seawater corrosion resistance

4) Wide operating temperature range

The operating temperature of conventional titanium alloy ranges from minus 269 ℃ to minus 600 ℃.

5), large elastic deformation capacity

Titanium alloy has high yield strength and low elastic modulus (E), so it is very suitable for springs and other parts, and more importantly, it is suitable for large-reach horizontal wells.

6), lower expansion coefficient

This feature makes petroleum equipment more adaptable to temperature changes and reduces the internal stress of structural parts.

7), non-magnetic

Meet the requirements of the normal use of some detection, communication and control methods in various equipment.

8), better processing performance

Titanium alloy pipes usually have good process properties such as casting, forging, welding, 3D printing, etc., which are often important factors in the selection process of various engineering materials.

Titanium Clad Copper Bar     titanium round rod     titanium tube     Ti-Al Sputtering Target

What are the common machining processes for titanium alloys?

 Titanium alloy can obtain different phase composition and structure by adjusting the heat treatment process. It is generally believed that the small equiaxed structure has good plasticity, thermal stability and fatigue strength; the needle-shaped structure has higher endurance strength, creep strength and fracture toughness; the equiaxed and needle-shaped mixed structure has better comprehensive properties.

Commonly used heat treatment methods are annealing, solid solution and aging treatment. Annealing is to eliminate internal stress, improve plasticity and structural stability, and obtain better overall performance. Usually, the annealing temperature of α alloy and (α+β) alloy is selected at 120~200℃ below the (α+β)-→β phase transformation point; the solution and aging treatment are rapid cooling from the high-temperature zone to obtain martensite α′ Phase and meta-stable β-phase, and then keep these meta-stable phases in the middle-temperature zone to decompose, obtain α-phase or compound and other finely dispersed second-phase particles to achieve the purpose of strengthening the alloy. Usually (α+β) alloys are quenched at 40~100℃ below the (α+β)—→β phase transition point, and metastable β alloys are quenched at 40~80℃ above the (α+β)—→β phase transition point. get on. The aging treatment temperature is generally 450~550℃. In addition, in order to meet the special requirements of the workpiece, the industry also uses metal heat treatment processes such as double annealing, isothermal annealing, β heat treatment, and thermomechanical heat treatment.

Gr12 Ti-0.3Mo-0.8Ni Titanium Bar     ERTi-9 Titanium Welding Wire     Gr7 Ti-0.2Pd Titanium Tube     Gr16 Ti-0.5Pd Titanium Tube

Titanium alloy tube installation related precautions

Industrial pure titanium is the most widely used titanium and titanium alloy material due to its low cost and easy production. The α-ti alloy in industrial pure titanium is commonly used in aviation, shipbuilding and chemical industries, and its impurity content has a great influence on its cold workability and the mechanical properties of finished materials. Increasing impurity content can increase the strength of titanium and reduce its plasticity. Once its quality is improperly controlled, the performance of the titanium material will not be guaranteed, and even the titanium ingot or billet cannot be processed into materials, resulting in waste products. This shows that the impurities The element content has a great influence on the mechanical properties of titanium materials.

Therefore, in the production of industrial pure titanium, the impurity content of titanium must be strictly controlled. After the pure titanium material is processed into titanium wires of different specifications, the problem of brittle fracture occurs in the subsequent drawing process. According to the site conditions, there is only a very small amount of titanium ingot forging remaining material and different specifications of the titanium material after processing. Titanium wire specifications range from 47.0, 465.5, 45.0, 44.5, and 03.0. In response to this situation, the failed samples were retrieved according to the method of random sampling and numbered from largest to smallest diameter: a, b, e, d, p. A small amount of titanium ingot forging numbered g was then inspected and analyzed.

 The nature of the brittle fracture problem of titanium wire has a lot to do with its impurity content. Therefore, it is necessary to understand its impurity source. The impurity elements in industrial pure titanium include Fe, S, 0, N, H, etc., and the content of these impurity elements is its finished product. The performance of the material has a greater impact, and once the impurity content is improperly controlled, the performance of the titanium material will not be guaranteed. It is not only difficult to process and even causes the risk of fracture. Due to the high chemical activity of titanium and titanium alloys, during the processing process , It will react violently with the oxygen and nitrogen in the atmosphere to form a dense oxide layer and getter layer, and prevent the re-infiltration and oxidation of gas. Therefore, oxygen is added as an added element during the production of titanium wire.

The nitrogen in the titanium wire mainly comes from several aspects in the preparation process of sponge titanium:

  (1) The residual air in the assembly of the reduction distillation equipment is absorbed by the titanium:

  (2) All nitrogen remaining in the argon gas is sucked into the titanium;

  (3) The gas leaked by the reduction distillation operation and the gas leaked when the negative pressure occurs in the discharge of MC2 and other reactors will increase the nitrogen content of titanium. After the gas leaks, yellow titanium nitride is formed on the surface of the sponge titanium, which is easier to identify.

 According to the above analysis, it can be known that the source of nitrogen in the titanium wire of this failure sample is sponge titanium, so the entry of nitrogen in the subsequent processing can be excluded. On the other hand, from the principle of plastic deformation of metal and related literature, it can be known that the formation of nitrogen atoms and titanium The interstitial solid solution hinders the slip of dislocations, which increases the strength of titanium and decreases its coherence, which affects its room temperature tensile properties. Among the interstitial impurities, the strengthening effect of N is the most obvious.

Gr7 Ti-0.2Pd Titanium Bar     Gr5 Ti-6Al-4V Titanium Wire     ERTi-2 Pure Titanium Welding Wire     Gr2 Pure Titanium Tube

Titanium crafts and titanium tableware have been widely used in life

The strength of titanium tube is relatively high, and the strength of ordinary steel is almost the same, even some high-strength titanium alloys are stronger than alloy structural steel. What is the performance of the titanium tube? Let's get to know.

The service temperature of the titanium tube is much higher than that of the aluminum alloy, and it can maintain a certain strength in a medium temperature environment. Titanium alloy works in a humid environment or in seawater, and its corrosion resistance is much better than stainless steel. And its corrosion resistance is also very strong, can resist alkali, chloride, chlorine organic substances, nitric acid, sulfuric acid and other corrosive substances.

But titanium also has disadvantages, that is, poor corrosion resistance to reducing oxygen and chromium salt media. The mechanical properties of titanium alloy can still be maintained at low and ultra-low temperature.

Generally speaking, aluminum alloy or stainless steel is easily confused with titanium, which is simply oxidation corrosion. Aluminum alloy is not corrosion-resistant, stainless steel is corrosion-resistant, stronger than aluminum alloy, and titanium alloy is completely corrosion-resistant. Secondly, high-temperature oxidation method and heating and dissolution method can be distinguished.

Gr5 Ti-6Al-4V Titanium Foil     Gr12 Ti-0.3Mo-0.8Ni Titanium Tube     Gr7 Ti-0.2Pd Titanium Plate     Gr2 Pure Titanium Sheet

The forming process of titanium rod and titanium alloy rod under hot extrusion

Titanium rods and titanium alloy rod blanks have low thermal conductivity, which will cause a great temperature difference between the surface layer and the inner layer during hot extrusion. When the temperature of the extrusion cylinder is 400 degrees, the temperature difference can reach 200 to 250 degrees. Under the combined influence of suction strengthening and the large temperature difference of the blank section, the metal on the surface and the center of the blank produces very different strength and plastic properties, which will cause very uneven deformation during the extrusion process. Large additional tensile stress is generated in the extruded product, which becomes the source of cracks and cracks on the surface of the extruded product. The hot extrusion process of titanium rods and titanium alloy rod products is more complicated than the extrusion process of aluminum alloy, copper alloy, and even steel, which is determined by the special physical and chemical properties of titanium rods and titanium alloy rods.

Industrial titanium alloy metal flow kinetics research shows that in the temperature zone corresponding to the different phase states of each alloy, the metal flow behavior is greatly different. Therefore, one of the main factors affecting the extrusion flow characteristics of titanium rods and titanium alloy rods is the heating temperature of the blank that determines the state of the metal phase transformation. Extrusion at the temperature of a or a+P phase zone compares with extrusion at the temperature of p phase zone, the metal flow is more uniform. It is very difficult to obtain high surface quality for extruded products. So far, the extrusion process of titanium alloy rods must use lubricants. The main reason is that titanium will form a fusible eutectic with iron-based or nickel-based alloy mold materials at temperatures of 980 degrees and 1030 degrees, which will cause the mold to wear strongly.

 The main factors affecting metal flow during extrusion:

(1) Extrusion method. Reverse extrusion is more uniform than forward extrusion, cold extrusion is more uniform than hot extrusion, and lubricated extrusion is more uniform than non-lubricated extrusion. The influence of the extrusion method is realized by changing the friction conditions.

(2) Extrusion speed. As the extrusion speed increases, the unevenness of the metal flow increases.

(3) Extrusion temperature. When the extrusion temperature increases and the deformation resistance of the blank decreases, the uneven flow of the metal increases. During the extrusion process, if the heating temperature of the extrusion cylinder and the mold is too low, and the metal temperature difference between the outer layer and the center layer is large, the unevenness of the metal flow will increase. The better the thermal conductivity of the metal, the more uniform the temperature distribution on the end surface of the ingot.

(4) Metal strength. When other conditions are the same, the higher the metal strength, the more uniform the metal flow.

(5) Die angle. The larger the die angle "(that is, the angle between the end face of the die and the central axis), the more uneven the metal fluidity. When using porous die extrusion, the die hole arrangement is reasonable, and the metal flow tends to be uniform.

(6) Degree of deformation. If the degree of deformation is too large or too small, the metal will flow unevenly.

titanium rod     Medical Grade Titanium Wire     titanium welded tubing     titanium rolling plate

Operational characteristics of titanium alloy plate straightening process

Check whether the straightening machine is operating normally, and check and remove all dirt, oil and metal chips on the machine. Then, adjust the brief analysis between the upper and lower rolls of the straightening machine.

In the straightening operation, it is required that the titanium alloy plate cannot have corners or crimping, otherwise, it must be flattened with a mallet; dirt and titanium chips are not allowed on the titanium alloy plate, otherwise, it must be cleaned and cleaned in time; the titanium alloy plate is straightened It must be aligned to the center, no skew, if any skew is found, it must be adjusted; the titanium alloy plate is not allowed to pass through the straightening machine, nor is it allowed to straighten two overlapping plates at the same time.

When the titanium alloy plate is straightened, when local waves are found, the pressure of the machine must be adjusted in time to eliminate the waves. For example, when there is a wave in the middle of the iron plate, the support roller in the middle should be raised (that is, u value is lowered). The larger the wave, the larger the rise, and so on.

When the titanium alloy plate is straightened, if the effective plate is stuck in the machine and is not allowed to pass by force, stop immediately, raise the roller, and then return to the titanium alloy plate. If you need to retreat the titanium alloy plate, you should also lift the roller to work.

It is not allowed to pressurize the work roll during the shutdown. At the same time, the straightened titanium alloy plate should be re-examined, and if there is any unqualified straightening, repeat the straightening. If straightening is really impossible, you should send it to a tension leveler for straightening.

AMS 4928 Titanium Alloy Bar     titanium straight wire     titanium tig welding wire     titanium pure powder

What are the titanium plate manufacturing processes?

Hot forging is a forging process performed above the metal recrystallization temperature. Hot rolling is a rolling process performed at a temperature higher than the recrystallization temperature. Cold rolling: A rolling process in which the plastic deformation temperature is lower than the recovery temperature. Annealing: A metal heat treatment process that slowly heats the metal to a certain temperature, keeps it for a sufficient time, and then cools it at an appropriate rate (usually slow cooling, sometimes controlled cooling). Pickling: The parts are immersed in an aqueous solution such as sulfuric acid to remove oxides and other films on the metal surface. It is the pre-treatment or intermediate treatment of electroplating, enamel, rolling and other processes.

grade 5 titanium bar     Grade 12 Titanium Wire     titanium square pipe     6al4v titanium sheet

Stress and deformation of metal titanium rod titanium tube during drawing

The cutting force of titanium alloy processing is only slightly higher than that of steel of the same hardness, but the physical phenomenon of processing titanium alloy is much more complicated than processing steel, which makes titanium alloy processing face huge difficulties. The thermal conductivity of most titanium alloys is very low, only 1/7 that of steel and 1/16 that of aluminum.

Therefore, the heat generated in the process of cutting titanium alloy will not be quickly transferred to the workpiece or taken away by the chips, but will be concentrated in the cutting area. The temperature generated can be as high as 1,000 ℃, causing the cutting edge of the tool to quickly wear, crack and Generate built-up edge, wear blades quickly appear, and generate more heat in the cutting area, further shortening the life of the tool.

The high temperature generated during the cutting process also destroys the surface integrity of the titanium alloy parts, resulting in a decrease in the geometric accuracy of the parts and a work hardening phenomenon that severely reduces its fatigue strength.

The elasticity of titanium alloy may be beneficial to the performance of parts, but in the cutting process, the elastic deformation of the workpiece is an important cause of vibration. The cutting pressure causes the "elastic" workpiece to leave the tool and rebound, so that the friction between the tool and the workpiece is greater than the cutting action. The friction process also generates heat, which aggravates the poor thermal conductivity of titanium alloys.

This problem is even more serious when processing thin-walled or ring-shaped parts that are easily deformed. It is not an easy task to process thin-walled titanium alloy parts to the expected dimensional accuracy. Because when the workpiece material is pushed away by the tool, the local deformation of the thin wall has exceeded the elastic range and plastic deformation occurs, and the material strength and hardness of the cutting point increase significantly. At this time, machining according to the originally determined cutting speed becomes too high, which further leads to sharp tool wear.

Grade 2 Titanium Bar     Grade 7 Titanium Wire     titanium tubing for bike frame     Grade 1 Titanium Plate

Process performance of industrial pure titanium

Titanium alloy is a very light material, it has small elasticity, high strength, and also has a good heat resistance and corrosion resistance. It is one of the important materials used to manufacture weapons and equipment, and it is also a relatively common material currently used by nuclear submarines. Whether it is Chinese nuclear submarines or US and Russian nuclear submarines, they use a large amount of titanium alloy materials in their own submarine construction. The proportion of titanium alloy materials used is also very different. For example, Russian nuclear submarines like to use a lot of titanium alloy materials, while the US military nuclear submarines use titanium alloy materials relatively low-key. China has abundant reserves of titanium alloy resources, and the reserves of ilmenite ore rank first in the world. The moderate use of titanium alloys on nuclear submarines will greatly improve the hardware performance of China's nuclear submarines.

 Titanium alloy has a huge advantage for China's nuclear submarines. In particular, China has made great achievements in the use of titanium alloy materials. The C919 large passenger plane and the CZ-5 high-thrust launch vehicle all use key rare metal materials such as titanium and titanium alloys. Titanium alloy, as one of the important materials for weapons manufacturing, is mainly used to manufacture rockets, missiles and other weapons components or engine and compressor parts. Not only that, but it can also be used to make delicate parts and even submarines.

Countries in the world are working hard to study the casting technology of titanium alloys, but the three countries with the highest achievements are the United States, Russia and China. The United States occupies a leading position in this regard, but because the domestic production of titanium is not high, it usually only uses titanium alloys in key and necessary places. Russia has continued to develop in the field of titanium alloy technology based on the former Soviet Union's experience in manufacturing many nuclear submarines from titanium alloys. And China, as a country that developed military science and technology late, is not lost to other military powers. According to records, my country has used nearly 20% of the titanium alloy material in the manufacture of the J-20 to increase the life of the airframe.

This is our great power weapon, and it will play an important role in the future. It also fully proves that our country has begun to grow stronger in industry and gradually rise in military power.

Grade 7 Titanium Bar     titanium alloy tube     thin titanium plate     titanium block

Industrial pure titanium is excellent in stress corrosion resistance, and damage to titanium equipment due to stress corrosion is rare.

The pickling conditions of titanium rods and titanium alloy rods are determined by the types (characteristics) of the oxide layer and the existing reaction layer, and the types of this layer are subject to high-temperature heating processes and increased processing temperatures (for example, forging, casting, welding, etc.) )Impact. At a lower processing temperature, it may be about 600 degrees: the following high-temperature heating temperature conditions only generate a thin oxide layer. Under high-temperature conditions, it forms an oxygen-rich dispersion zone near a certain oxide layer, and it is also necessary to go through pickling Remove this oxygen-rich dispersion layer. A variety of different methods for removing scale can be selected: the mechanical method of removing the thick oxide layer and hard outer layer, the method of removing oxide scale in a molten salt bath, and the method of removing oxide scale by acid elution in acid solution

In many cases, a combination of several methods can be used. For example, a combination of a mechanical method of removing oxide scale and then pickling, or a combination of salt bath and then pickling. In the case of an oxide layer and a dispersion layer formed at a higher temperature, a special method should be used^ but when heated to 600 degrees at a high temperature: most of the oxide layer formed can be dissolved after the usual pickling Drop.

The mechanical method of removing the oxide scale usually adopts the method of sandblasting, polishing, brushing and then pickling to remove the oxide layer formed under high-temperature conditions. In any case, it is necessary to adopt measures to prevent mechanically disposed of foreign impurities from passing through the metal surface, because the subsequent thermal processing or thermal treatment process may cause cracks due to the reduction of plasticity. Corundum, emery or steel grit is usually used when disposing of forgings. When disposing of plates, shot blasting is also used to remove the oxide scale. In order to achieve the surface quality of titanium, cold rolling or fine grinding is then performed. It can be unevenly removed by salt bath or pickling to remove more than 750 degrees: the thick adhesive oxide layer formed at the temperature, and the oxide scale can be removed beyond words only by grinding. In this case, it is difficult to choose a lower grinding speed (5*10m/s). This can prevent overheating of the grinding surface because a hardened layer develops due to oxygen absorption in the overheated area.

It is necessary to corrode or polish the deoxidized surface to improve the surface quality several times. Before the disposal, the external surface should be degreased. It can be dewaxed in organic solvents to prevent stress crack corrosion as much as possible. It should not be rich in chlorides or hydrocarbons with similar effects, or in alkaline solutions rich in water. During degreasing. Titanium is stable to this medium, as long as the dirt adhered to the surface can be dissolved, but the titanium surface itself does not corrode. In order to corrode the thinner oxide layer, an acid solution can be used for corrosion. Adjust the composition of the acid solution in the pickling tank according to the desired appearance or characteristics. In most cases, it is rich in hydrofluoric acid as the basic substance, and hydrochloric acid or sulfuric acid is also used in individual cases.

machined titanium round rod     titanium foil grade 5     Ti 15333 Titanium Strip     titanium hexagon rod

Types and production technology of titanium pipes for marine engineering

Titanium alloy pipes are divided into seamless pipes and welded pipes.

Titanium alloy seamless pipes are generally processed by extrusion + rolling or diagonal rolling piercing + rolling. Hot extrusion is a plastic processing technology that uses the principle of plastic material deformation to use a die to make a titanium alloy blank into a material with a certain shape, thickness and performance in a hot state. It is a complex process that combines plastic deformation and flow deformation. The material is in a state of three-way compressive stress during extrusion, which is beneficial to the plasticity of the material. The economic pressing process mainly uses rice to produce seamless pipes, bars and profiles for drinking gold. The main processing parameters of the extrusion process include extrusion ratio, extrusion temperature, extrusion speed and so on. When extruding the tube, a hollow tube made of titanium alloy loose material through deep hole processing or hot pressure perforation is also used as the original blank. The size of the hollow tube blank is determined by the inner diameter of the extrusion barrel of the extruder. Due to the high viscosity of drink alloys, copper, mild steel or other metals are usually covered during extrusion, or the surface of titanium alloy is covered with grease, glass lubricant, etc. for extrusion. Through extrusion, titanium alloy thick-walled pipes or titanium alloy pipes that do not require high dimensional accuracy can be directly prepared. High-precision alloy seamless pipes are generally produced by rolling technology. The billets are generally extruded pipe blanks. Commonly used pipe rolling methods include two-half pass cold rolling, two-roll ring pass cold rolling, and multi-roll cold rolling. Rolling, two-target warm rolling and multi-roll warm rolling, etc. For pure titanium with low strength and high plasticity, it is generally produced by cold rolling. The deformation of the pass is generally controlled at 20% to 60%. Annealing treatment is required between passes to eliminate work hardening and restore plasticity. For medium and high-strength titanium alloys, due to high tensile strength, large deformation resistance and poor processing plasticity: the warm-drying technology must be used when rolling seamless pipes, that is, induction heating devices or flame heaters are installed on the rolling mill. The heating temperature is controlled at about 100°C below the recrystallization temperature.

For large-diameter thick-walled titanium composite pipes: generally, the skew-rolling piercing method is also used for production. The cross-rolling piercing method uses tensile stress along the weave and transverse directions of the rolled blanks to cause micro-cracks in the core area of ​​the circular material, and then expand into a loose area. The use of high-temperature-resistant plugs enables the plastic deformation of the metal in the loose area: direct forming of the tube from the city. The heating temperature of the billet in this method is higher, which is beneficial to improve the new cracking properties of the pipe to achieve the purpose of high production efficiency, high material utilization rate and low production cost. Titanium alloy welded pipes are generally produced by welding, and welded pipes are produced with high precision A very efficient method for thin titanium alloy pipes: its production process is: titanium strip coil slitting → forming → welding → shaping and sizing ~ heat treatment straightening eddy current/ultrasonic inspection → airtight inspection of finished welded pipes. The production process is generally continuous production: The product quality has high stability, and the pipes produced are generally used for heat exchangers, condensers, etc.

Titanium Metal     ASTM B381 Titanium Forged Ring     bending titanium tubing     Titanium Sputtering Target

Preparation of titanium and titanium alloy seamless pipe blank

Industrial pure titanium contains a large amount of oxygen, nitrogen, carbon and many other impurity elements (such as iron, silicon, etc.). It is essentially a titanium alloy with a low alloy content. Compared with chemically pure titanium, its strength is greatly improved due to its more impurity elements, and its mechanical and chemical properties are similar to stainless steel (but the strength is still lower than that of titanium alloy).

The characteristics of industrial pure titanium are: the strength is not high, but the plasticity is good, it is easy to be formed, stamped, welded, and has good machinability; it has good properties in the atmosphere, seawater, wet chlorine and oxidizing, neutral, and weakly reducing media. The corrosion resistance and oxidation resistance are better than most austenitic stainless steels, but the heat resistance is poor, and the use temperature should not be too high.

Industrial pure titanium is divided into three grades: TA1, TA2, and TA3 according to its impurity content. The interstitial impurity elements of these three industrial pure titanium are gradually increasing, so its mechanical strength and hardness also gradually increase, but the plasticity and toughness decrease accordingly.

The industrial pure titanium commonly used in industry is TA2, because of its moderate corrosion resistance and comprehensive mechanical properties. TA3 can be used when the wear resistance and strength requirements are high. TA1 can be used when better-forming properties are required.

Industrial pure titanium is mainly used for working temperature below 350℃, with little force, but requires good plasticity stamping parts and corrosion-resistant structural parts, such as aircraft skeletons, skins, engine accessories; seawater corrosion-resistant pipelines for ships, Valves, pumps and hydrofoils, seawater desalination system components; chemical heat exchangers, pump bodies, distillation towers, coolers, agitators, tee links, impellers, fasteners, ion pumps, compressor valves and diesel Engine pistons, connecting rods, leaf springs, etc.

grade 5 titanium plate     titanium pipe fitting     titanium exhaust pipe     Grade 1 Titanium Pipe

Sponge titanium tube casting performance

With the development of the titanium industry, more and more fields find the use of titanium products. The titanium rod is one of the best.

(1) Medical titanium rods Titanium has been used in the global pharmaceutical industry, surgical instruments, human implants and other medical fields for decades as an emerging material, and has achieved great success.

(2) In response to the bone and joint injuries caused by trauma and tumors in the human body, artificial joints, bone plates and screws can be made from titanium and titanium alloys and are now widely used in clinical practice. It is also used for hip joints (including femoral heads), knee joints, elbow joints, metacarpophalangeal joints, interphalangeal joints, mandibles, artificial vertebral body (spine orthosis), pacemaker housing, artificial heart (heart valve), Artificial dental implants and titanium mesh are used in cranial plastic surgery.

(3) The requirements for medical titanium rod implant materials can be classified into three aspects: the biocompatibility of the material with the human body, the corrosion resistance of the material in the human environment, and the mechanical properties of the material.

 Medical titanium rods have low density, lightweight, high strength, good corrosion resistance, high-temperature resistance, low-temperature resistance, strong acid resistance, and strong alkali resistance. It is very good material. Our company has complete processing equipment and rich processing experience. The medical titanium rods produced have been tested by a third party (chemical composition, mechanical properties, metallographic structure, tolerance), and the polished and car polished rods have undergone flaw detection processing. Product quality stable. Mainly used in industries such as mechanical equipment, electroplating equipment, medical, various precision parts.

Grade 9 Titanium Plate     titanium sheet     Zirconium Sputtering Target     Titanium Aluminum Sputtering Target

How does the rolling process affect the structure and performance of the titanium plate used in plate heat exchangers?

Titanium plate heat exchanger is a new type of high-efficiency heat exchanger with corrugated heat transfer surface, which is widely used in the heating, cooling, condensation and evaporation process of chemical, petroleum, metallurgy, electric power, shipbuilding, ocean, medicine and other industrial sectors . With people's further understanding of the superiority of the plate heat exchanger and the expansion of its application fields, the plate heat exchanger has developed rapidly and has now become the main heat exchange equipment. Due to its high efficiency, compactness and excellent corrosion resistance, titanium plate heat exchangers have become the first choice for many strong corrosive conditions. Titanium plates for plate heat exchangers are mainly pure titanium plates with a thickness of less than 1.0mm, which have special requirements for the strength, elongation, cupping, and grain structure of the plate. In order to increase the development of plate heat exchangers, make them more widely used in various fields, fully realize the localization of titanium plates for plate heat exchangers, and improve the quality of plate refueling, it is necessary to study the organization of various rolling processes for plate refueling And the impact of performance, to further improve the rate of plate replacement pressing.

How does the rolling process affect the structure and performance of the titanium plate used in plate heat exchangers?

The first rolling process uses one-way rolling. Due to the unidirectional rolling process, the plate elongates along the rolling direction, the crystal grains are elongated, and become columnar crystals into a band-like structure. The number of grains in each direction of the columnar crystal is different, and the number of grain boundaries is also different, so the processing structure produces anisotropy, high strength, poor plasticity and deep drawing performance. The second rolling process uses reversing rolling. After the commutation rolling, the grains in the longitudinal and transverse directions are elongated and become columnar crystals. In the last pass of cold rolling, the processing rate is greater than 50%, causing the grains to be broken. The columnar crystals that have been broken after recrystallization annealing re-nucleate and crystallize into equiaxed grains. Compared with the first rolling process, the mechanical properties are greatly improved, especially the plastic deep drawing properties. However, the metallographic examination found that there are still slip lines in the fine structure, indicating that the recrystallization is still insufficient, and the temperature or the time needs to be increased. The difference between the third rolling process and the second rolling process is that the heat treatment process is different. The electric furnace is used for heating, and the plates are stacked for annealing, which reduces the pollution on the surface of the titanium plate, and the holding time is slightly extended. The metallography presents an equiaxed grain structure, the grains are smaller than those of the second rolling process, and they are complete and fully recrystallized, so the mechanical properties are also better than those of the second rolling process.

Through the above test, the mechanical properties obtained by the three rolling processes are different from the microstructure, and the mechanical properties of the plate using the third rolling process, especially the cupping value and elongation are better than the first two The mechanical properties of one rolling process state, and the grain size is 1 to 1.5 levels smaller than the second rolling process state, which meets the conditions of plate replacement and pressing, and the forming rate reaches about 95%, which can be used for plate heat exchangers. Titanium plate has higher utilization rate and considerable profit margin, which is worthy of promotion.

bending titanium tube     Titanium Rotary Sputtering Target     F12 Titanium Forging      Titanium Metal Wire For Industrial

What are the technical requirements for titanium tubes?

The titanium tube is light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as tube and tube heat exchangers, coil heat exchangers, serpentine tube heat exchangers, condensers, evaporators and transportation pipelines. Many nuclear power industries use titanium tubes as standard tubes for their units.

skills requirement:

1. The chemical composition of titanium and titanium alloy pipes should meet the requirements of GB/T3620.1, and the allowable deviation of the chemical composition of Mingkun Titanium Industry shall meet the requirements of GB/T3620.2 during the re-inspection.

2. The allowable deviation of the outer diameter of the pipe should meet the requirements of Table 1.

3. The allowable deviation of the pipe wall thickness should not exceed ±12.5% ​​of its nominal wall thickness. The allowable deviation of the pipe wall thickness is not applicable to the weld of titanium welded pipes.

4. The length of the pipe should meet the requirements of Table 2.

5. The fixed-length or multiple-length length of the pipe should be within the range of its indefinite length, and the allowable deviation of the fixed-length length is +10mm. The multiple-length length should also be included in the cut when the pipe is cut, and each cut should be 5mm. 

Gr5 Ti-6Al-4V Titanium Bar     Gr2 Pure Titanium Wire     ERTi-1 Pure Titanium Welding Wire     Gr23 Ti-6Al-4V ELI Titanium Tube

Development characteristics of titanium alloy materials and titanium product processing technology

 Due to the high manufacturing cost of titanium alloys, in order to reduce costs, the competitiveness of titanium alloys in the entire metal material market has been improved at a lower price. It is generally believed that titanium has incomparable superior performance compared to other materials, but the price of titanium often discourages consumers (especially car manufacturers). The emergence of high-quality, low-cost titanium alloys will certainly help the popularization and application of titanium and titanium alloys.

Judging from the application status at home and abroad and the development of titanium processing technology, the plastic processing technology of titanium and titanium alloys will develop in the following directions in the future:

1) High performance, that is, the development of alloys with higher service temperature, higher specific strength, higher specific modulus, better corrosion resistance and wear resistance.

2) Multi-function, namely the development of titanium alloys with various special functions and uses, such as high damping, low expansion, constant resistance, high resistance, resistance to electrolytic passivation and hydrogen storage, shape memory, superconductivity, low modulus biomedical And other titanium alloys, and further expand the application of titanium and titanium alloys.

3) Deepen the research of traditional alloys, improve the practical performance of existing alloys, and expand the application range of traditional alloys through the improvement of equipment and processes.

4) Adopt advanced processing technology and large-scale continuous processing equipment to develop continuous processing technology, direct rolling technology, cold forming technology and near-net forming technology to improve the production efficiency, yield and product performance of titanium alloys.

5) Reduce costs, develop alloys that contain no or almost no precious metal elements, and add cheap elements such as iron, oxygen and nitrogen, and develop titanium alloys that are easy to process and shape, easy to cut, and have cheap alloy elements and master alloys. Develop titanium alloys and use banned materials to increase the recovery rate and utilization rate of banned titanium. This is particularly important for reducing the cost of civilian titanium alloys.

6) Use advanced computer technology to simulate the deformation and processing of the workpiece, predict the evolution of the metal microstructure, and even predict the mechanical properties of the product (yield strength, tensile strength, elongation, hardness, etc.). ), and design or improve molds and tooling; analyze and process test results, reduce test volume, improve work efficiency, and reduce development costs.

Gr5 Ti-6Al-4V Titanium Bar     Gr2 Pure Titanium Wire     ERTi-1 Pure Titanium Welding Wire     Gr23 Ti-6Al-4V ELI Titanium Tube